Crooked or Skewed Prints: Check Rotation and Paper Loading

Compare the printed lines with the sheet edges. A whole page that is rotated needs different checks from straight content that is clipped, shifted or doubled.

Compare the alignment grid

Confirm what is crooked

Use the grid comparison to note whether the whole pattern rotates relative to the paper edges or individual lines look doubled. If the content is straight but an edge is missing, start with scaling and printable-area checks and the border test.

Check loading without forcing the paper

  1. Use paper that your model supports and inspect the stack for curl or damaged edges.
  2. Reload it using the tray's instructions and load limit. Position guides as the manual describes, without bending or tightly compressing the stack.
  3. Match the loaded size and media type in the driver, then compare another print with the same orientation.

For Canon TS3300-series printers, the official paper-feed checks cover supported loading, paper condition and matching media settings. The tray and loading direction are model-specific; do not copy them to a different printer.

Compare the printer's own output

If the built-in test is straight while one application's page rotates, compare that application's page setup and driver. If both rotate or feeding is inconsistent, keep sample prints for manufacturer support. Skew alone does not identify a worn roller or establish that a repair is needed.

For doubled text or line edges rather than whole-page rotation, use the blurry-text guide. Stop repeated attempts if paper jams or tears, and follow only your model's documented jam procedure.

Method and support

These checks help compare visible output; they cannot identify a failed component or certify a repair. Use your exact model's instructions for maintenance. Stop using the printer for smoke, leaks, unusual heat or electrical damage, and contact qualified support.

Read how the visual tests work, find manufacturer support or contact the site operator.